1.      Application: annealing and tinning for bare copper wire 2.      Input wire size：φ0.10~φ0.52mm 3.      Lines of input wire：40 4.      Wire speed：MAX.300M/MIN 5.      This produce line including: annealing machine, tractor, tinning machine, and coiler，four single machines connected in series. 6.      Annealing machine including: 5.5M annealer, water tank, dryer and jump type pay off. 7.      Tractor:  the traction wheel is controlled by frequency speed control device, which can get any speed. And the traction barrel is plated by hard chromium. 8.      Tinning furnace: tinning adopts horizontal hot dip, and the dies are used in the tinning. The capacity of the tinning furnace is about 400KG. 9.      Take up machine: uses double speed specially-made torque motor, horizontally made, easy to load and unload the bobbin. 10.    No. of take up bobbin: 44（4 bobbins for spare）, with 44 pieces of 1A booster adjusting take up tension independently. 11.    Take up axes:  P5~25 plastic made axes (φ75~φ250) . Take up capacity 2~25KG. 12.    Transverse: adopts DISCO stepless speed regulation. The transverse throw and pitch can be adjusted. 13.    Heat preservation control device: annealer, dryer and the tinning furnace adopt automatic heat preservation control devices, ensuring temperature equalization and saving electricity. The annealing adopts three stage temperature control, enabling annealing equalization. All above information is only for reference, the detailed technical specification will be offered after getting your detailed inquiry information such as product to be produced