1)HM6/2D-4/20 Horizontal type intermediate speed drawing and enameling machine:
1.Wire diameter：Φ0.60～Φ1.10mm，round aluminum enameling wire
2.Wire number of production line：4 wires
3.Maximum inlet wire diameter before drawing：2.60mm
4.Maximum drawing passes：11，elongation for NO.1-10：1.26, elongation for NO.11：1.21
5.Number of enameling：20（20+10+6）。
6.Mechanical speed：Maximum 300m/min
7.Enameling type：By dies (spraying type in die box)
8.Number of take-up：4
9.Take-up type：individual hauling，big capacity，automatic bobbin changing
10.Take-up bobbin：  PT25、PT45、PT60、PT100、PT200、PT270
11.Pay-off type：Damped pay-off by brush
12.Gap between wires：  9mm
13.Pay-off size：cage type
14.Total power：300KW
15.DV=80～100

2) VM6/2D-5+5/13 Vertical type Enameling Machine
1. Main technical specification
1.1 wire size: enameled copper wire Ф0.80～Ф2.50mm
1.2 Enameled wire insulation structure
    Single coating：PU，(M)PE，PEI
    Dual coating： PE+PAI，PEI+PAI
1.3 wire number： 10 wires
1.4Continuous on-line drawing machine
   Input wire diameter:  max ：φ4.0mm
   Max drawing passes：8 passes，available minimum drawing passes: 3 passes
Reduction rate：final die(N0.8)1.175, the other dies (N0.1～7)1.25
Drawing speed : ≤75m／min
   Final capstan diameter：φ450 mm。
1.5 Take-up：
    Take-up line speed：≤75m／min
    Take up bobbin sizes： PT25，PT45，PT60，PT90，PT200，PT270。
1.6 Softening furnace：
Available highest temperature：650℃，two stage of temperature control
Softening tube：12 pieces
Softening tube： internal diameter φ24mm×wall thickness φ3.0mm
The effective length of softening furnace：12m。
1.7 Coating device：4set of painting tanks
Coating passes：13 passes , arrangement: 9+4， distance among the wires:14mm。
1.8 furnace：
Number of cavity furnace：5×2 ， Number of circulating system：1×2
The effective length of drying:  8 meter
Using ceramic honeycomb catalyst for Oven catalyst
Using high-temperature high-quality stainless steel in Catalytic chamber
The maximum operating temperature allowed in drying cavity：550℃
The maximum operating temperature allowed in catalytic heating chamber：750℃
Available maximum rotating speed of circular fan：3000rpm
Maximum rotating speed of exhausting fan：1500rpm
Up/down guide wheel diameter：φ400mm。
1.9 Cooling device：
Cooling cavity number ：2 pieces
Length of cooling cavity：6m
Each wire will line separated from others in the air duct.
1.10 Power：
Power supply： Three-phase five-wireL1/L2/L3/N/PE
Voltage：380±10％V；Frequency：50±1HZ
Installation power:540KW

All above information is only for reference, the detailed technical specification
will be offered after getting your detailed inquiry information such as product
to be produced